fbpx

"WELL DESIGNED, HIGH-QUALITY CANOPIES READ-TO-MOUNT"

ABOUT US

Designtak produces prefabricated entrance roofs in modern design and of the highest quality. The canopies have a unique aluminum construction that provides long service life with minimal maintenance needs. Resellers are well-known building chains as well as prefabricated house factories and large construction companies. Designtak is based in Vetlanda, Sweden, has a turnover of approximately 20 million Swedish Krona and 10 employees.

DESIGNTAK STÖDS AV TILLVÄXTVERKET

COMPANY HISTORY

Everything started with a cold winter. Two experienced tinsmiths, Eddie Wingren and Daniel Hallgren, began to feel tired of installing in cold, snow and rain. Over the years, they had installed many entrance roofs and realized the time and effort it took. Here was the idea of ready-made, functional and aesthetically pleasing canopies. A vision the two could not let go!

Eddie explains:
To mount entrance roofs takes time and requires a skilled craftsman in order to turn out really well. At the same time, there was only a limited number of ready-made canopies in the market and they were of varying quality and appearance. We utilized our knowledge of roofs and experience in construction and developed a series of well-designed, maintenance-free canopy in different styles.

It did not take long before the idea turned into a success and today Designtak is the leading manufacturer of entrance roofs in Sweden. The products are also delivered to our Scandinavian neighbors and the rest of Europe knocks on the door. In order to meet the demand, we moved into into just over 3,000 newly built square meters in April 2018 .

CONSTRUCTION

A CANOPY BY DESIGNTAK IS MADE WITH 100% CRAFTSMANSHIP. IN MOST PARTS IT IS MANUFACTURED BY HAND.

  1. We start with building the aluminum structure. It consists of square aluminum tubes and U-profiles that are welded together.
  2. Once the frame is complete, it is send to the plate department where the supports on which the aluminum plates will later be resting are riveted to the baseframe. Now the frame be wainscotted with the aluminium.
  3. The already-colored aluminum plates are rolled from a roll and are individiually cut into the right size. Then the edges are folded by hand to receive those double folded seams. One plate is U-shaped, bent and fixed with rivets, to serve as a rain gutter and to seal the folded edges in addition to that.
  4. Thereafter, the holes are drilled for the water drainage at the corresponding side, depending on the customer.
  5. If this is done, the aluminum plates are connected to the base frame. In most models, three plates are used which are about 50 cm wide each. The plates are again also connected to each other by double folds, whereby all seams become completely water resistant. We place cleats between the folded roof sheets so that no fasteners for sheet metal are visible.
  6. If this is done, hangers are added to obtain a nice finish on the sides. We have placed great emphasis on invisible fixation, for example, the mounting plate is screwed first, and then the roof panels are mounted and secured by folding, no screws or rivets are visible.
  7. Finally, the aluminum plates are mounted to the roof base. These are made of white painted 1mm thick aluminum sheet. Before the bottomplates are fitted, we make holes for headlights and mount it.
  8. Every single canopy, which comes from the plate department, is sent to the quality manager who carefully examined the entry roof for defects and possibly sends it back for fixing.
  9. If the examiner gives his "OK", the canop will be packed and everything is ready for shipment. Your Designtak is on its way to you!

 

DESIGNTAK IS CERTIFIED ACCORDING TO EN 1090-3

Designtak is certified according to EN 1090-3 and may CE mark welded structural components and kits in aluminum.
CE marking means Designtak's production control systems (FPC) satisfy the harmonized standard EN 1090-1.
From 1 July 2014, all composite structural components must meet all requirements for CE marking according to EN 1090-1.

see certificate

References

MANY OF OUR LARGEST CUSTOMERS ARE CONSTRUCTION COMPANIES, BUILDING COMPANIES AND HOUSE MANUFACTURERS



Referenser:  JM                                   

Anebyhus AB
Animonhus AB
Baroness Design AB
Beijer Byggmaterial AB
Brf Lilla Väsby
Bygghemma.se
Byggnadsfirma G. Insulander AB
CL-Tak Service
Cramo Instant AB
Eriksson & Lönn Bygg AB
Fiskarhedenvillan AB
Flexator AB
Gnestahem AB
Götenehus AB
Hermanssons Bygg
HSB Fastigheter Sydost AB
Intressanta Hus AB
Jensens Förvaltning AB
Knivstad Golv och Bygg AB
Kärnhem svenska AB
LJ Bygg AB
LPT Construction AB
Lösvirkeshus i Borås AB
Malmö Studenthus HB
Myresjöhus AB
Ncc Construction Sverige AB
Nåiden Bygg AB
Panghus AB
PBW i Vetlanda AB
Peab Sverige AB
Rådhuset Upphandlingar AB
Skanska Sverige AB
Stena Fastigheter AB
Sven Fröbergs Bygg AB
Svenska Regmaster AB
Sävsjö Plåt & Ventilation AB
Sävsjö Rörtjänst AB
Sävsjö Trähus AB
Trivselhus AB
Vallsjöhus AB
Vetlanda Rör AB
Vårgårdahus AB
Västerviks Dörrtjänst AB
XL Bygg AB

Kontakt

  • Telefon
    0383-56 60 01
  • Email
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Adress

    Hammargatan 15
    SE-57433 Vetlanda
    Sweden

Vi är ett kreditvärdigt företag enligt Bisnodes värderingssystem som baserar sig på en mängd olika beslutsregler. Denna uppgift är alltid aktuell, informationen uppdateras dagligen via Bisnodes databas.